Tuesday, August 18, 2009

Copper Range Hood

Custom hood approx 43x43x23" made from 16 Ga Copper and 2"x1/4" buss bar, fully welded with patina and wax finish.
The builder for this project is Dettrich Homes in Freeland

Stainless Steel Back Splash

Custom Splash panels made from 20 ga #4 Stainless steel.The builder for this project is Spectrum Construction in Langley and designed by Flat Rock Productions

Hot Rod Go Kart

New custom "Go Kart" built from electrical conduit a good friend gave me.
Another good friend traded me the motor (Honda 5.5 hp) for some metal and I rescued it from the bushes. The basic hardware I bought on line (Sprockets, Bearings and such). I found the rear wheels at Island Recycling. The most help was from "Affordable Go Karts.com"! They sell and support all kinds of crazy hot rod parts, thanks!

Monday, July 20, 2009

Metal Coat Rack and Stair Rail Project

Hand rail made from 3/4" rods.

Custom coat rack made from 5/8" rod.

Steel post and Rail Project

The Rails and posts are made from good ol' 3/4" steel rod.
Christie and Bruce Schwager Designed and built the amazing madrona doors!

New Gallery Work

"Re-Entry" set up outside of Robert Daniel Gallery.
Entry Arbor made from Hot and Cold formed 3/4" steel rod.

These two are “COUNTESS” and “MATRON” they are formed from “Rustic Steel Plate”

This Piece is called “TRU-TO FORM” it is soldered “Zinc Plated steel”.
These new works by "Me" on display @ Robert Daniel Gallery on Fawcett st in Down Town Tacoma.

Metal Entry Signage

Entry Signage made from 1 in Angle Iron, Hand formed recycled Copper and Hand set Rivets.
Located in Langley WA

Zinc Coffee Table

New Zinc metal top hand formed from 4 pcs of flat "S" seamed pcs of sheet.
Mounted on owner supplied "Found" remodeled file cabinet.

Metal Stair Railing

Great colaboration with Baerg construction.
Made from 1 1/4" pipe, 5/8" rod, flatbar and clearcoated.
Wood work done by Baerg const.